What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 23.06.2025 06:07

This device then solves the entire problem.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
2024–10–14 [Omar Gharbi Omar Gharbi ]
2 dead in Las Vegas Strip shooting, with suspect known but not yet arrested, police say - ABC News
The MOV will conduct when the voltage exceeds 50% of line voltage.
a photo is worth a thousand words.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
Exclusive | Longevity Is Now a Factor When Picking an Embryo for IVF - WSJ
But… the neutral is now “floating” because of the 1 ohm resistance.
This is 'the assistant's answer'
The other is “what does a “fuse” do?”
CNBC's UK Exchange newsletter: No easy answers for Reeves - CNBC
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
I post the exact comment here.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
Kroger faces massive worker walkout, closed stores - TheStreet
Now when you have a certain ac resistance, then a current flows in a loop.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
The third is lightning and “how it gets conducted into a home.”
How Amazon’s Nuclear Deal Could Solve a Touchy Political Problem - Barron's
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
One is “what exactly is in a ‘surge protector’ ? ”
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
James Bond game 007 First Light gets first trailer - The Verge
the problem then depends on "how fast does the fuse operate?".
Edit 2024–10.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
How should you brush your hair when its wet or dry?
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
nine
[image of Common-mode choke]
What is lightning?
watchOS 26 adds new wrist flick gesture for these Apple Watch models - 9to5Mac
The bolt then partially travels down the line to your home.
An AC voltage/ current source, and an ac inductive load.
These devices are installed between the “hot” and “neutral” and protective ground.
Why do guys have better skin than women even though women use more product?
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
This one hit behind the barn.
Because the load is inductive, the current lags the voltage.(by a bit).
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
What does a fuse do?
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
eight
These are simplified answers to the original question, and does not change anything I wrote above.
A fuse is a non-resetable over current circuit protector.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
At least they know the answer if they wanted it.
[old diagram got deleted by accident]
There are two important concepts here.
He then describes Rainy Season and Lightning.
but this device (an Inductor) … impedes the rapid changes in the current.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
This is where this question deviates from being a 'generic' question, and becomes more specific.
In schematic diagrams this is the symbol for a fuse:
One
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
It seems Mohan does not understand the difference between a comment and an Answer.
A circuit breaker is similar, but is resettable.
There are three different concepts here that are getting confused.
First Sentence:
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
what exactly is a ‘surge’ protector?
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
At one ohm, the resistor has a maximum of 1 watt power.
so, what happens?
For this case there are devices called Metal oxide varistors (MOV).
This is where the MOV conducts again, and dissipated the energy.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
Here is a simplified AC power diagram.
But it can get overloaded, and no longer works.
Upvotes:
He then describes the function of a fuse.
2024–10–16 [ OO OLAOYE OYEBODE ]
2024–10–10[John johnson John Johnson ]
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
but I think this circuit , shows a few more pieces.
(Dc diagram shown, AC is similar).
He then asserts :
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
Barnstars:
So, the voltage could go up to 500 volts, and the fuse will not open up.
It also is a device that limits the change in current flow.